FURUNO FS-1570 & FS-2570 MF-HF
SSB / DSC

The FS-1570 and 2570 are new MF/HF radio- telephones for general communications and GMDSS applications. Provided in addition to radiotelephony operation are DSC (Digital Selective Call) on general communications and DSC Watch Receiver on all distress and safety frequencies in MF and HF bands.

Teklif Formu

The FS-1570 and 2570 maintain a continuous watch on a distress call even while you are exchanging normal voice messages. DSC channels can be individually set or all selected channels can be automatically scanned. When a DSC message is received, the radiotelephone gives audible and visual alarms. The FS-1570 and 2570 work on all authorized transmit frequencies between 1.6 and 27.5 MHz. Receiver frequencies are selectable between 100 kHz and 30 MHz in 10 Hz steps. The transmit and receive frequencies can be selected separately or in pair. The digital frequency synthesizer provides high frequency stability for DSC and NBDP as well as telephony operation. The compact cabinet allows a flexible and space- saving installation in a communication console. Optional equipment available are a distress alert unit, received call unit, remote control unit, distress message control unit, etc. In addition a telex modem (NBDP) can be accommodated in the transceiver unit for general message transfer and distress message/maritime safety information handling, satisfying the carriage requirement in GMDSS A3- A4 sea areas.

GENERAL
Frequency Range
Channels
TX: 1.6 to 27.5 MHz
RX: 0.1 to 30 MHz
256 channels, preset by competent service depots, from
- All ITU RR Appendix 16 (4 - 27.5MHz)
- All distress frequencies in telephony, DSC, NBDP
- All telephony frequencies allocated by national authorities according to ITU RR Article 8 (1.6 - 4 MHz)
Rules and Regulations
ITU-R Rec. 493-10(Class A), 541-8, 1082-1
IEC 61097-3/61097-8/61097-9, IEC 61162-1, IEC 60945
IMO Res. A.804(19) and MSC.68(68) amendment, EN 300 338
Frequency Accuracy
±10 Hz (telephony)
Communication System
Simplex or semi-duplex
Class of Emission
J3E (Telephony),
J2B (DSC, NBDP)
TRANSCEIVER
RF Output Power
FS-1570: 150 W
FS-2570: 250 W (FCC Part 80.215
limits 150 W between 2 and
4 MHz, 400 W on 2182 kHz
Reducible to 60 Wpep (Distress in full)
Antenna
7-18 m whip or wire
Tuning Speed
0.2 to 2 s typical
Receiver Output
Capable of providing at least 2 W (1 W/8 Ω, 4 W/4 Ω)
DSC
Distress Call and Message
RR 3112: Format specifier(distress), Self-ID Nature of distress, Distress coordinates, Time, Telecommand (EOS, ECC)
Distress and Safety
2187.5, 4207.5, 6312, 8414.5, 12577, 16804.5 kHz
Routine call DSC:
1.6 to 27.5 MHz (FS-2570 only with optional receiver for routine)
Stability:
±0.5 Hz
Message Storage
Receive:
50 distress messages max. plus 50 non-distress messages
Transmit:
50 messages, Telephone No, Frequency, etc.
Alarms
Audible and visual on receipt of distress, urgency or routine calls, position error
Display
160 characters in 8 lines 95(W) x 60(H) in mm
Frequency shift
Mark 1615 Hz, Space 1785 Hz, 100 baud
Interface
IEC 61162-1
POWER SUPPLY
24 VDC, 20 A (150 W), 35 A (250 W) for TX, 0.8 A (150 W), 1.5 A (250 W)for RX 115/230 VAC with external rectifier
EQUIPMENT LIST
Standard
1. Control Unit. 1 unit
2. Telephone Handset
3. Antenna Coupler AT-1560-15 (FS-1570), AT-1560-25 (FS-2570)
4. Transceiver unit 1unit
Optional
1. Rectifier with changeover facility PR-300 for FS-1570 PR-850A for FS-2570
2. NBDP Monitor and Modem Unit
3. External Loudspeaker
4. Distress Alert Unit IC-302-DSC